|
Home
History of Turbex
Spray Washers
Tunnel Washers
Ultrasonic's
Mould Cleaning
How to find us
Respond Now!
| |
|
|
|
|
|
TUNNEL
WASH MACHINES
|
|
|
|
Turbex Tunnel Wash
machines are constructed from stainless steel and are designed for heavy
duty use. The machines have angled heaters that can be removed
without draining the tanks for ease during maintenance. Wash and
rinse stages are incorporated as required and compressed air blow off can
be provided between stages, with the blowing nozzles reciprocating from
side to side during operation. |
|
|
|
OPTIONAL
ACCESSORIES
Accessories available
for Turbex Tunnel Wash machines include the following:
● Steam extractors
●Oil skimmer
●Oil Separator
●Full flow fine filtration
●Gas heating (standard is electric)
●Automatic detergent dosing
●Cascade water refill
●Closed loop deionised rinse water system with regenerative carbon
and exchange resin cylinders |
- Industrial quality, robust
design.
- Constructed from stainless
steel.
- The standard range offers one
stage, two stages or three stages, all available with hot air
dryer.
- Variable speed drive stainless
steel mesh belt.
- The careful design and
selection of components ensures long maintenance intervals.
|
|
|
Turbex
Tunnel Wash machines are easy to operate and maintain. The sequence
of operation is as follows:
OPERATION
After moving through the pre-wash chamber, the parts travel through
the washing zone. The belt speed is variable, but a typical time
during this zone is two minutes.
From the washing chamber, the parts move through a drip zone and then to
an optional blow off stage with reciprocating compressed air
nozzles. If the machine is wash only with no hot air dryer, the
parts then exit from the machine.
If there are further stages, the process is repeated, and the parts will
then either exit from the machine or travel through the hot air drying
chamber.
|
|
|
|
